× Woodcraft Guide
Terms of use Privacy Policy

The basics of spindle turning



how to read a tape measure for dummies

Although spinning a spindle may appear simple, it is actually complex. Professional Nick Cook shares some of these principles for achieving optimal results. The first is to never go uphill with the spindle. This will cause plenty of catches and disastrous results. Also, ensure that your tool rest is the same height as your tools. A higher rest is needed for thin tools than for thick ones. You should cut above the center to avoid any catches.

Tools

There are many tools that can be used to assist you in spindle-turning. For this task, a spindle gouge and a skew-chisel are essential. For turning spindles, you can use either one of these tools. Each tool has a unique design for different types of profiles, so you should buy a spindle gouge that suits your needs. For a more precise turn, use a skew chisel to turn a beaded pommel.


Materials

A spinning tool is made up of a variety of tools that produce the final product. Most types of workpieces can be turned using a spindle turner. The diameter of the hole, or spindle diameter, determines how small a particular workpiece can pass through it. A minilathe's hole diameter is 3/4", however, it can safely be reshaped to 13/16". The tooling can be used by tiling the front of this hole.

Rosewood

Rosewood spindles can be used for woodturning projects if you are interested in this type of work. The exotic hardwood is available in a wide range of colors and has a natural luster. The wood turns easily on the lathe. The three-inch square blanks can be used for quick spindle turning projects. Try working with exotic woods like Patagonian Rosewood if you are looking for something challenging.


Hickory

Hickory can be a hard wood to use for spindles. This type of wood can be difficult to handle by hand, but once you've mastered it, you'll love the rustic beauty of your creations. Hickory is strong and resilient and a favorite woodworker because of its open grain, color variations and durability.

Hardwoods


marking wood for cutting

Consider the type of turning that you are looking for when choosing woods to spindle turn. There are many woods you can choose from. Spindle blanks can be purchased that have been turned already, but it is important to choose the right ones. Look for hardwoods like cherry, maple, and ash that are sustainable. This will ensure that you can continue to turn them as you need to. Hardwoods for spindle turning can be hard, but they will provide a good, sturdy base for the finished product.

Woodturning machines

The size is an important factor to consider when buying a spindle turner machine. Woodturning machines are usually heavy. Therefore, the larger the machine is, the heavier the tool. The edge of the tool is another thing to watch out for. The less likely it is to grab the wood, the smaller the edge of the tool. Because of this, cutting downhill is more difficult and can cause your tool to grab the wood and pull it off the table.




FAQ

What kind tools do carpenters use to build?

A hammer is the most commonly used tool by carpenters. A hammer helps to carpenter pound nails into the wood. A hammer is used to hold pieces together during a project. Other tools include clamps.


What kind of wood should you use?

There are many wood types that are used in woodworking, including oak, maple and birch. Each type of wood has unique characteristics that affect the look and feel of the final product. Oak is a darker wood and tends to be more durable than other types. Birch is soft and light, and mahogany is denseer and heavier. You also have the option of solid wood or veneers. Veneers are thin wood sheets that are glued together to form one layer.


What furniture can I refinish?

Yes! There are many different ways to refinish older furniture without the need for professional help. Here are some ideas:

To remove stains and scratches, use sandpaper. After that, use a clean towel to wipe the surface.

Apply clear polyurethane varnish. Before moving furniture, let dry completely.

Acrylic paint can be used to paint furniture.

Instead of painting, use stain. The stain will give the furniture a rich look.

Apply shellac wax. The wax will add shine to the wood and protect it.


How can I determine which tools are most suitable for me?

When shopping for tools, it helps to think about your needs and preferences. Do you prefer metal or plastic handles? What size are you most comfortable using for screws and nails? Do you prefer to use hand tools or power tools?



Statistics

  • Woodworkers on the lower end of that spectrum, the bottom 10% to be exact, make roughly $24,000 a year, while the top 10% makes $108,000. (zippia.com)
  • The best-paid 10 percent make $76,000, while the lowest-paid 10 percent make $34,000. (zippia.com)
  • Overall employment of woodworkers is projected to grow 8 percent from 2020 to 2030, about as fast as the average for all occupations. (bls.gov)
  • Average lumber prices rose about 600 percent between April 2020 and May 2021. (familyhandyman.com)



External Links

amazon.com


youtube.com


amzn.to


bls.gov




How To

How to join hardwood without using nails

Woodworking is a hobby that many people enjoy doing. Woodworking can be a fun hobby because you can work with your hands to make useful objects from wood. You may need to join two pieces without the use of nails. This article will teach you how to do this to keep your woodwork projects looking great.

Before joining the pieces of wood together, you will need to first trim any edges. Avoid leaving sharp edges that could lead to problems later. Once you've done this, you're ready to start gluing your boards together.

When working with hardwood, glue should be applied only to one side. For softwoods like cedar and pine, glue should be applied to both sides. Once the glue has dried, press the boards together until they are fully adhered. After applying the glue, let dry the boards before proceeding to the next stage.

After you have glued your boards, drill holes where you want to insert screws. Depending on what type screw you choose, the size of these holes will depend on how big they are. For example, if you're going to use a 1/2-inch wood screw, then you should drill a hole that is at least 3/4 inches deep.

Once you have drilled your holes you will need to drive the screws through each joint and into the backside. Avoid hitting the board's top surface. Otherwise, you could ruin the finish. Try to not hit the ends of the screws when driving the screws. This will prevent the wood from splitting.

After your project is completed, you will need to protect it from the weather. You can either seal the entire piece of furniture or cover the top. You'll want a product that lasts for many years. There are many options: oil-based varnishes; polyurethane; shellac; lacquer.

These products are available at most home improvement stores. It is important to ensure that you purchase the correct product for the job. Don't forget to keep in mind that some finishes are toxic. When handling certain finishes, wear protective gear.




 



The basics of spindle turning